Male corset with rear crossover strap digital pattern

DIGITAL PATTERN! This is an 12-panelled (6 panels per side) corseted pattern for the male body. There are six waist cinch sizes per chest/hip size allowing for a gentle supporting garment or snatched for serious tight-lacers.

You can also buy here if you are based in the EU or other non-compliant countries (Canada) https://payhip.com/b/NVWXk

The print at home (A4/ US size letter) is printed on 32 pages however you need only print out the sizes you need. The maximum number of pattern pages is 12 plus 4 pages of specific instructions. Also includes a 25 page manual of general corset construction notes!

This pattern is drafted in AutoCAD and available as an instant download - you will need to print out on size letter (A) or A4 paper, making sure 'actual size' and 'centre the print' is ticked in your print dialogue box. The A4/ letter pattern has layers that can be isolated so you need only print your required size (note - you need to open using the free Adobe reader for this). A large format print (A1) is also included with one size per A1 page.

It is recommended that you make a toile to the largest of your measurements to check the fit of the pattern – at this stage you can take in the smaller of your measurements, lengthen or shorten if need be, and transfer these amendments to your pattern to ensure a perfect fitting corset. As with all corset patterns, this pattern is not a beginners level sewing project.

Corsets by Caroline have designed another two corset designs for men that you may be interested in, check out the cincher and the waistcoat!