Caroline's corset blog

Musings and progress from Caroline - projects she's working on, tips and tricks, and thoughts on corsetry

 RSS Feed

  1. You can't wear a corset from the 1900's without some assistance from a bust pad to create the mono-bosom much loved at the time. As a prelude to my next design (from 1906) I drafted a bust improver in four sizes;

    BIP EDITED

    It was a quick Sunday afternoon project. I bagged out both the cradle and cups, hiding the seam allowances within the two layers and stuffing the cups with hollow-fill stuffing. Patreon patrons received this as a bonus extra pattern and it is also available in my Etsy store.

    FRONT COVER

  2. CAMILLE CLIFFORD
     
    There are a lot of misconceptions in the corsetry world about body shape, padding, how corsets were worn etc. etc. Edwardian corsetry particularly seems to elicit comments from makers who have absorbed information through modern blogs and Facebook groups, but might not have got their facts completely right.
     
    I'm not an expert by any stretch of the imagination but when I see text from people who have been in the business for a long time, and have had a direct line to the Edwardians because of their age and particular circumstances, I jump on it!
     
    The following is information I have gleaned from one such expert, and I thought I would summarise here. The 'expert' worked from extant patterns and documentation, including a great deal of first-hand writing done by women, for women, in the 1900-1915 era.
     
    1. Artifice was employed where nature failed (i.e. in bust padding, additional ruffles on corset-covers, etc.), and the undergarments, smoothed through the front and gathered and fastened at back, heightened the visual effect of the proportion between the derrière and the waist, which helped the illusion along.
    2. Bodies of women in general were less developed, both in bone structure and musculature, than is the case today. This is partly due to a more nutritious diet (especially since the post-WWII era), and partly due to the fact that girls were put into corsets almost from infancy, both to mould the body and to accustom girls to having their torsos constricted.
    3. The “average size” French pattern of this era assumed a woman with a natural bust measurement of about 35″ to 36″, waist of 24″ to 25″ and hip of 37″ to 38″. In the finished garment itself, the measurements are closer to bust: 37″, waist: 26″ to 27″ and hip 38″ to 40″, clearly allowing a bit of accommodation for illusory padding.  The finished (outer) garment sizes also had to allow for 4 to 5 layers of lingerie, including the corset, underneath. This meant that the corset had not only to compensate for its own addition to waist thickness, but had to compress the waist down by 2 or 3 additional inches in order to compensate for the multiple layers of garment thicknesses.
    4. It would not have been unusual for a young woman to achieve a corseted waist of 21-22″ before donning the rest of her lingerie and outer clothing. This was completely achievable for an average young woman with less developed musculature and smaller bones than is the average today. Many middle-aged women too, having been “compressed” for decades on a daily basis, tightened up their corsets even further for special occasions in an attempt to revisit that ideal figure.
    5. As far as posture in a corset is concerned, the straight-front corset of the ca. 1902-1915 time period did indeed thrust the body into a somewhat artificial stance, although for the average woman this was not as extreme as in some professional fashion photographs of the time would lead one to believe; these were bodies accustomed to fashionable moulding.
    6. Photographs of women in their corsets during the era were intended for only one of two purposes: either “naughty” images to titillate, or images designed to sell corsetry. In the latter case, the model’s stance was often exaggerated for maximum effect, and/or the waist area retouched to make it appear even smaller. This is why relying on photographs, as opposed to first hand accounts and articles by women themselves of the time can be deceiving.
    7. Exaggerated hip width and hip padding was not a feature of Edwardian corsetry. A corset of ca. 1905-10 was intended to create a straight line at front, but fall smoothly and evenly over the hips, while gently forcing a slightly forward stance. This naturally had the effect of pushing the hips and derrière outward, and the layers of chemise, drawers and petticoat underneath did the rest to add volume to the hips and accent the whole silhouette.
    8. The corset should be supporting and lifting the bust upward from below, rather than sitting in the natural dip (under-bust) creating the fashionable “uni-bust” shape of the time.
    Personally, my main takeaway from this account is that the hip spring in corsets of the Edwardian era was quite substantial because women had smaller waists due to corseting from an early age, and the bulk in the hip area was 'filled' by the fabric undergarments rather than padding. Padding is used by modern wearers who may not have the required hip spring nor wear the corset with multiple layers in a historically accurate way.
     
    What do you think? Are you an expert in Edwardian corsetry and have a different opinion? Would love to hear!
  3.  

    drafting front page

    I have been working on this E book for months. It takes me a long time to write up these manuals, especially as there are some YouTube tutorials included which I tend to do over and over - I am never happy and really hate listening back to these creations. Ugh!

    It's 50 pages and 10,000 words and was written to follow on from the ultimate corset making guides. The information can be used to inform both traditional and digital drafters (note that the technicalities of digital drafting is covered in detail in the Corseting the 21st century CAD guide). The following is the content list that will give you an idea of what is included;

    Introduction
    Example 1 – drafting a simple under-bust (flat patterning)
    Extending the under-bust into an over-bust
    Example 2 – using percentages & a spreadsheet to create a simple under-bust
    Tweaks to panel shapes/ how to change a pattern’s size (YouTube tutorials)
    Bra drafting overview (with YouTube links)
    Methods used to draft unusual and complex shapes in corsetry
    - Seeking inspiration and the development of a design
    o Sketching using croquis / doodling in CAD
    o Altering an existing pattern using an example
    o Draping directly on to a mannequin
    Grading corsetry patterns, part one – simple shapes
    - Complexity of design
    - A word on digital drafting
    - Creating a commercial pattern from a graded design
    Grading corsetry patterns, part two – more complex shapes
    - Example 1 – grading an Edwardian design
    - Example 2 – grading a complex contemporary design